Equipment reference
Technical
Specifications
Find plate rolling, leveling and axle press specifications by model. Compare capacities, working dimensions and drive power from the EZHONG equipment catalogue.
Find your equipment
88 tabulated models / configurations, plus 9 profile bending models.
These are catalogue reference values. Confirm the configuration and capacity for your material, plate dimensions, forming geometry and process. For plate rolls, distinguish thickness with pre-bending from thickness without pre-bending; for levelers, use the yield strength stated for the model.
Catalogue data · 3 configurations
Shipbuilding plate rolls
3-roll configurations with independent lower-roll drives and deflection compensation.
Scroll horizontally to view all specifications.
| Model | Minimum radius at full load (mm) | Back-up roll rows | Main motor power (kW) |
|---|---|---|---|
| 3R-2200T×21000 | 650 | 8 | 75×2 |
| 3R-2200T×18000 | 650 | 8 | 75×2 |
| 3R-2000T×17000 | 650 | 6 | 75×2 |
Showing 3 of 3 models / configurations.
Technical specifications are subject to change by the manufacturer without notice.
Catalogue data · 12 configurations
3-roll plate rolling machines | EZW11S
Maximum plate thickness with and without pre-bending, working width, power, speed and overall dimensions.
Scroll horizontally to view all specifications.
| Model | Working width (mm) | Thickness without pre-bending (mm) | Thickness with pre-bending (mm) | Motor power (kW) | Working speed (m/min) | Overall dimensions (mm) |
|---|---|---|---|---|---|---|
| EZW11S-30×3000 | 3000 | 30 | 20 | 37.5 | 1.5 - 5 | 5950×2800×2000 |
| EZW11S-35×3000 | 3000 | 35 | 25 | 48 | 1.5 - 5 | 6500×2800×2000 |
| EZW11S-45×3000 | 3000 | 45 | 30 | 52 | 1.5 - 5 | 6600×2800×2200 |
| EZW11S-50×3000 | 3000 | 50 | 35 | 73.5 | 1.5 - 4 | 7400×3100×2650 |
| EZW11S-60×3000 | 3000 | 60 | 40 | 73.5 | 1.5 - 4 | 7550×3350×2700 |
| EZW11S-25×4000 | 4000 | 25 | 15 | 37.5 | 1.5 - 5 | 6950×2800×2000 |
| EZW11S-30×4000 | 4000 | 30 | 18 | 48 | 1.5 - 5 | 7500×2800×2000 |
| EZW11S-35×4000 | 4000 | 35 | 20 | 52 | 1.5 - 5 | 7600×2800×2200 |
| EZW11S-40×4000 | 4000 | 40 | 25 | 73.5 | 1.5 - 4 | 8400×3100×2650 |
| EZW11S-45×4000 | 4000 | 45 | 30 | 73.5 | 1.5 - 4 | 8550×3350×2700 |
| EZW11S-50×4000 | 4000 | 50 | 40 | 52+15 | 4.3 | 8750×3550×2950 |
| EZW11S-60×4000 | 4000 | 60 | 50 | 60+15 | 4 | 9100×3900×3500 |
Showing 12 of 12 models / configurations.
Nominal design dimensions and capacities. Custom designs available on request.
Catalogue data · 13 configurations
3-roll plate rolling machines | EZW11X
Maximum plate thickness with and without pre-bending, working width, power, speed and overall dimensions.
Scroll horizontally to view all specifications.
| Model | Working width (mm) | Thickness without pre-bending (mm) | Thickness with pre-bending (mm) | Motor power (kW) | Working speed (m/min) | Overall dimensions (mm) |
|---|---|---|---|---|---|---|
| EZW11X-70×3200 | 3200 | 70 | 60 | 60+24.1 | 3.40 | 7980×3320×3680 |
| EZW11X-80×3200 | 3200 | 80 | 70 | 60+32.2 | 4.00 | 8040×3950×3940 |
| EZW11X-90×3200 | 3200 | 90 | 80 | 74+32.2 | 3.36 | 8280×3990×4470 |
| EZW11X-100×3200 | 3200 | 100 | 90 | 104+32.2 | 3.50 | 8600×4160×4490 |
| EZW11X-110×3200 | 3200 | 110 | 100 | 110+39.2 | 4.00 | 8860×4160×4960 |
| EZW11X-120×3200 | 3200 | 120 | 110 | 126+39.2 | 3.60 | 8880×4360×4960 |
| EZW11X-130×3200 | 3200 | 130 | 115 | 126+39.2 | 3.60 | 9070×4690×6100 |
| EZW11X-140×3200 | 3200 | 140 | 125 | 126+39.2 | 3.60 | 10350×4990×6330 |
| EZW11X-150×3200 | 3200 | 150 | 135 | 150+84.2 | 3.50 | 10430×4970×5850 |
| EZW11X-160×3200 | 3200 | 160 | 140 | 150+79.2 | 3.20 | 10620×5450×6400 |
| EZW11X-170×3200 | 3200 | 170 | 150 | 220+84.2 | 3.12 | 10950×5920×6360 |
| EZW11X-180×3200 | 3200 | 180 | 170 | 220+93.7 | 3.12 | 10950×5920×6360 |
| EZW11X-200×3200 | 3200 | 200 | 180 | 220+93.7 | 3.36 | 12100×6160×7460 |
Showing 13 of 13 models / configurations.
Nominal design dimensions and capacities. Custom designs available on request.
Catalogue data · 22 configurations
4-roll plate rolling machines | EZW12X
Rolling capacities, motor power, working speed and overall dimensions.
Scroll horizontally to view all specifications.
| Model | Working width (mm) | Thickness without pre-bending (mm) | Thickness with pre-bending (mm) | Motor power (kW) | Working speed (m/min) | Overall dimensions (mm) |
|---|---|---|---|---|---|---|
| EZW12X-16×2000 | 2000 | 16 | 12 | 22 | 1.5 - 6 | 5800×2000×1800 |
| EZW12X-16×2500 | 2500 | 16 | 12 | 30 | 1.5 - 6 | 6810×2000×1870 |
| EZW12X-20×2000 | 2000 | 20 | 16 | 30 | 1.5 - 6 | 6000×2000×1850 |
| EZW12X-20×2500 | 2500 | 20 | 16 | 37 | 1.5 - 6 | 6850×2000×2070 |
| EZW12X-20×3000 | 3000 | 20 | 16 | 45 | 1.5 - 6 | 7310×2100×2200 |
| EZW12X-25×2000 | 2000 | 25 | 22 | 37 | 1.5 - 6 | 6300×2300×2070 |
| EZW12X-25×2500 | 2500 | 25 | 22 | 45 | 1.5 - 6 | 6000×2600×2100 |
| EZW12X-25×3000 | 3000 | 25 | 22 | 55 | 1.5 - 6 | 9000×3200×2500 |
| EZW12X-25×4000 | 4000 | 25 | 22 | 63 | 1.5 - 6 | 10100×3600×2900 |
| EZW12X-30×2000 | 2000 | 30 | 25 | 45 | 1.5 - 6 | 7500×2600×2500 |
| EZW12X-30×2500 | 2500 | 30 | 25 | 55 | 1.5 - 6 | 8400×2500×2600 |
| EZW12X-30×3000 | 3000 | 30 | 25 | 60 | 1.5 - 6 | 9200×2500×2900 |
| EZW12X-30×4000 | 4000 | 30 | 25 | 60 | 1.5 - 6 | 10200×3500×2900 |
| EZW12X-40×2000 | 2000 | 40 | 36 | 45 | 1.5 - 6 | 8200×3000×2600 |
| EZW12X-40×2500 | 2500 | 40 | 36 | 60 | 1.5 - 6 | 8700×3500×2900 |
| EZW12X-40×3000 | 3000 | 40 | 36 | 76 | 1.5 - 6 | 8200×3600×3000 |
| EZW12X-40×4000 | 4000 | 40 | 36 | 80 | 1.5 - 6 | 12500×4000×3500 |
| EZW12X-50×2000 | 2000 | 50 | 45 | 60 | 1.5 - 6 | 8500×3500×3000 |
| EZW12X-50×2500 | 2500 | 50 | 45 | 75 | 1.5 - 6 | 9000×4000×3300 |
| EZW12X-50×3000 | 3000 | 50 | 45 | 90 | 1.5 - 6 | 9800×4300×3500 |
| EZW12X-60×2500 | 2500 | 60 | 50 | 90 | 1.5 - 6 | 9500×4500×3700 |
| EZW12X-60×3000 | 3000 | 60 | 50 | 121 | 1.5 - 6 | 10000×4500×3800 |
Showing 22 of 22 models / configurations.
Technical specifications are subject to change without notice. Special models available on request.
Catalogue data · 30 configurations
Plate levelers | EZW43 series
Individual capacity values at the stated material yield strength for each model.
Scroll horizontally to view all specifications.
| Model | Yield strength (MPa) | Work rolls | Thickness max./min. (mm) | Plate width (mm) | Back-up roll rows | Roll adjustment stroke (mm) | Working speed (m/min) | Main drive power (kW) | Roll adjustment power (kW) |
|---|---|---|---|---|---|---|---|---|---|
| EZW43B-8×1500 | 1100 | 15 | 8/3 | 1500 | 3 | +50 / -17 | 6 | 45×2 | 3×2 |
| EZW43BY-8×2000 | 1600 | 17 | 8/3 | 2000 | 3 | +130 / -15 | 3.2 - 6 | 75×2 | 4×2 |
| EZW43B-10×1500 | 960 | 13 | 10/3 | 1500 | 3 | +50 / -15 | 3.2 - 8 | 75 | 3×2 |
| EZW43B-10×1800 | 1600 | 15 | 10/3 | 1800 | 3 | +130 / -15 | 3.2 - 6 | 55×2 | 3×2 |
| EZW43B-10×3000 | 360 | 13 | 10/3 | 3000 | 4 | +50 / -5 | 6.9 | 7.5×2 + 3.7×2 | 5.5×2 |
| EZW43B-12×1000 | 960 | 11 | 12/4 | 1000 | 2 | +50 / -15 | 3 - 8 | 30×2 | 2.2×2 |
| EZW43C-12×2000 | 1000 | 13 | 12/4 | 2000 | 4 | +50 / -25 | 4.5 | 55×2 | 4×2 |
| EZW43B-12×3600 | 360 | 11 | 12/4 | 3600 | 4 | +45 / -15 | 6 | 30×2 | 4×2 |
| EZW43C-16×2500 | 1100 | 11 | 16/4 | 2500 | 3 | +60 / -23 | 3 - 8 | 90×2 | 7.5×2 |
| EZW43C-16×3200 | 360 | 11 | 16/4 | 3200 | 4 | +50 / -5 | 7.32 | 13×6 | 5.5×2 |
| EZW43-20×2000 | 1500 | 9 | 20/4 | 2000 | 3 | +70 / -20 | 6 | 167 | 5.5×2 |
| EZW43T-20×2000 | 600 | 9 | 20/4 | 2000 | 3 | +70 / -23 | 3 - 6 | 11×9 | 5.5×2 |
| EZW43C-20×2000 | 940 | 11 | 20/4 | 2000 | 3 | +60 / -20 | 6.2 | 37×2 | 5.5×2 |
| EZW43C-20×2500 | 360 | 13 | 20/5 | 2500 | 4 | +60 / -20 | 6 | 75×2 | 7.5×2 |
| EZW43C-20×3200 | 245 | 11 | 20/5 | 3200 | 4 | +60 / -20 | 6 | 11×7 + 5.5×2 | 5.5×2 |
| EZW43-25×1500 | 360 | 11 | 25/6 | 1500 | 3 | +50 / -5 | 6 | 30×2 | 2.2×2 |
| EZW43-25×2500 | 1500 | 9 | 25/6 | 2500 | 4 | +60 / -20 | 6 | 11×7 + 5.5×2 | 5.5×2 |
| EZW43-25×2450 | 1500 | 9 | 25/5 | 2450 | 4 | +60 / -20 | 6 | 11×7 + 5.5×2 | 5.5×2 |
| EZW43TY-30×1500 | 360 | 11 | 30/7 | 1500 | 3 | +60 / -20 | 6 | 30×2 | 4×2 |
| EZW43T-30×3000 | 360 | 9 | 30/6 | 3000 | 3 | +70 / -10 | 0 - 6 | 7.5×9 | 5.5×2 |
| EZW43T-36×4500 | 360 | 9 | 36/10 | 4500 | 4 | +30 / -10 | 0 - 6 | 11×7 + 7.5×2 | 5.5×2 |
| EZW43-40×2000 | 700 | 9 | 40/10 | 2000 | 3 | +240 / -40 | 0 - 6 | 22×7 + 11×2 | 5.5×2 |
| EZW43-40×3000 | 345 | 9 | 40/10 | 3000 | 4 | +300 / -20 | 0 - 5 | 15×7 + 7.5×2 | 7.5×2 |
| EZW43T-46×4500 | 345 | 7 | 46/12 | 4500 | 4 | +90 / -20 | 0 - 6 | 15×7 + 7.5×2 | 11×2 |
| EZW43-50×3000 | 245 | 7 | 50/10 | 3000 | 4 | +70 / -5 | 6 | 26×2 + 17×3 | 4×2 |
| EZW43T-60×2500 | 245 | 9 | 60/10 | 2500 | 3 | +200 / -25 | 5 | 15×7 + 5.5×2 | 5.5×2 |
| EZW43T-80×3000 | 360 | 7 | 80/30 | 3000 | 3 | +120 / 0 | 6 | 30×3 + 5.5×4 | 13×2 |
| EZW43T-90×3000 | 360 | 7 | 90/30 | 3000 | 2 | +300 / -10 | 4.8 | 22×5 + 11×2 | 13×2 |
| EZW43T-100×1500 | 345 | 7 | 100/25 | 1500 | 2 | +200 / 0 | 4.5 | 11×7 | 7.5×2 |
| EZW43T-120×3000 | 400 | 7 | 120/25 | 3000 | 3 | +300 / 0 | 2.4 - 6 | 37×5 + 22×2 | 18.5×2 |
Showing 30 of 30 models / configurations.
Capacity data is based on the stated yield strength. Special configurations are available to order.
Roll counts refer to work rolls; back-up rolls are counted in rows. Main drive and roll adjustment power are shown separately, corresponding to the upper and lower lines in the catalogue.
Catalogue data · 8 configurations
Horizontal axle presses | EZY92 series
Nominal force, stroke, wheel and shaft diameters, insertion length, pressing speed and dimensions.
Scroll horizontally to view all specifications.
| Model / configuration | Nominal force (kN) | Max. stroke (mm) | Max. wheel / shaft diameter (mm) | Max. insertion length (mm) | Pressing speed (mm/s) | Motor power (kW) | Overall dimensions (mm) |
|---|---|---|---|---|---|---|---|
| EZY92-2500KN / Standard | 2500 | 700 | 1300 / 300 | 3500 | 0 - 4 | 18.5 | 6180×1280×2420 |
| EZY92-3150KN / Standard | 3150 | 600 | 1300 / 350 | 2200 | 0 - 4 | 18.5 | 5360×1200×2400 |
| EZY92-3150KN / Long | 3150 | 700 | 1850 / 600 | 3500 | 0 - 4 | 18.5 | 6940×1600×2560 |
| EZY92-5000KN / Standard | 5000 | 700 | 1850 / 350 | 3500 | 0 - 2 | 18.5 | 6990×1700×3000 |
| EZY92-5000KN / Long | 5000 | 700 | 1850 / 450 | 5000 | 0 - 2.5 | 18.5 | 8300×1800×3000 |
| EZY92-6300KN | 6300 | 800 | 2000 / 860 | 5000 | 0 - 2 | 20 | 8900×1880×2800 |
| EZY92-8000KN | 8000 | 800 | 2200 / 860 | 6500 | 0 - 2 | 22 | 9600×2800×3100 |
| EZY92-10000KN | 10000 | 1200 | 5000 / 800 | 7000 | 0 - 2 | 22 | 12800×5900×3700 |
Showing 8 of 8 models / configurations.
Diameters are wheel / shaft. Length is maximum shaft insertion length.
Nominal reference values. Equipment is subject to technical changes by the manufacturer.
Profile bending machines | THW24
Hydraulic 3-roll machines for rolling and re-rounding L angles; T, I, U and H sections; flat, square and round bars; and round and square tubes. The catalogue lists the following models without a numerical capacity table.
- THW24-16
- THW24-45
- THW24S-75
- THW24S-100
- THW24-140
- THW24-180
- THW24-320
- THW24-400
- THW24-500
The configuration on page 29 has a fixed upper roll and two lower rolls moving along arcs, with all rolls driven. NC control, variable speed, hydraulic supports and section-specific tooling are options. Other configurations are described separately on page 31.
Catalogue page 29Confirm the configuration for your project
Send the model, material, yield strength, working width and thickness, final diameter and pre-bending requirements to our engineering team.